Bose Cinemate Digital Home Theater System Speaker "phono" Questions

...the ability to route 1 input to more than one output. 2) the sub signals need to be low level RCA/phono, and not high level speaker wire connections. That's not just about the type of connector. ...

...home cinema amplifiers have a low level pre out for subwoofers, for which you would just need a phono to phono cable. However if it doesn't and you have any type of amplifier with at least 2 ...

...input sockets.what lead do i need to connect it up with? Sounds like the output on the TV is a phono socket or a jack and the inputs on the sub woofer take banana plugs. You need (or should make ...

...wont connect to the tele the insructions arnt the clearest, thanks you can use a switched scart to phono adaptor or if you have audio out phono sockets on your tv use them as an input to your alba ...

...outs to the sub's L&R speaker IN sockets. Connecting to a surround receiver, just use the phono/RCA cable from the receiver's "Sub Pre Out" to the white phono/RCA labeled Low Level

...for room-born vibrations and loud sounds so it may create feedback. And a TT without an onboard Phono preamp will require connect to one in your electronics. It will be labeled explicitly "PHONO" ...

...and Left respectively. What type of connectors are on the SA51AR? I will guess TS (tip sleeve) or Phono for the sake of this answer. It sounds as if the PC's outputs are stereo TRS (tip, ring

...should be several set of three RCA Sockets on the back of the tv. Look for the red, whit and yellow Phono sockets. do you have these colours and are any of them labelled TV Out or output? Philips ...

...to feed an RCA cable pair for standard stereo to any audio device with a standard RCA input (except PHONO). Get a cable like the one described here: ...

...receiver and an RCA line splitter, and connect the primary sub-out to the CD or any input EXCEPT phono (resistance is different on the phono rca's). remove the plate from the sub and run the ...