Wahl 9765-301 "power screw clippers" Questions

Ad

Question about Andis Health & Beauty

1 Answer

...power screw" ???? To adjust clipper/trimmers to run to their voltage needs. If clipper/trimmer rattles or over vibrates it may need adjustment to the line voltage in your area. Before adjusting, ...

Ad

...Power-teq And Star-te: Oster class 76 clippers....had them for a week and... Oster class 76 clippers....had them for a week and now the blades rattle and make noise. How do I fix this?? Hope this ...

Ad

power screw when this terrible noise started until the clipper became silent, but then I realised that the blade wasn't cutting my hair anymore. The I turned it back till it started the noise, and

Question about Oster Health & Beauty

2 Answers

...screw driver in either direction, the noise you are talking about should quiet down quite a bit, Hi, its because in the uk we use 230V and 50hz whereas the Americans use 110V and 60hz. What you've ...

Question about Oster Health & Beauty

1 Answer

...oiling. Everything I can think of. $45.00 and WILL NOT CUT! HELP! There should be a power adjustment screw on the side of the clipper, turn it until you get the required power to trim your

Question about Andis Health & Beauty

2 Answers

power screw in one quarter turn If you are keeping the blades oiled correctly and turning the screw per the instructions does not help you will need to send your clipper in for and internal adjustment

Question about Wahl Health & Beauty

2 Answers

...screw to decrease the power, and that didn't really help. I put oil on the blades, no help. I took it apart to see if anything had been knocked loose, and it looked fine. Any suggestions? 1st remove ...

Question about Andis Health & Beauty

4 Answers

...power screw,check connector fork,if too tight losen tension inside the clipper why do hair clipper pull hair instead of cutting not really - where do they get their oil? the motor may be self oiling ...

Question about Oster Health & Beauty

1 Answer

power, whereas most of them, like pet clippers, are driven by a "screw gear" and not simply a vibrating spring loaded blade.... Sorry if you were hoping for an answer that would not require additional

Question about Wahl Health & Beauty

1 Answer

...To adjust power (tune), turn the power screw in a clockwise direction until you hear a noise. Then, slowly turn the power screw out (counter-clockwise) until the noise stops. This is maximum

Not finding what you are looking for?
Wahl 9765-301 Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top Wahl Health & Beauty Experts

shaveroutlet.com
shaveroutlet.com

Level 3 Expert

1652 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you a Wahl Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...