Hitachi CLU-5713TSI Remote Control "tv button flashing 4" Questions

...TV button will flash twice. Now enter one of the 4 digit codes. Again the TV button will flash twice. If an invalid code is entered, the TV button will only flash one long flash. If the first code ...

button. The TV will turn OFF. Other four digit codes to check for Sony TVs are: 0128/0013/0002/0071 & 0380. If code [0000] does not respond with try other codes. Repeatsteps 2 through 4 once again

...insted of a setup button you have to press and hold tv and select at the same time untill light flashes 3 times press 9-9-1 then press tv button untill tv turns off press select to lock into ...

...TV,VCR,CABLE,etc.) button until your device turns off.(On VCR,LD,and CD players use PLAY instead of POWER) Make sure that the remote is pointed at your device during the search, You may have to press ...

...button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the ...

...TV Power button for three seconds until the LED flashes Enter the three-digit code using the buttons on the number pad. Press OK. Note: The LED will flash three times. Test functionality with the TV ...

...tv button until all buttons across the top of the remote light up and release.The only button lit should be the clear tv button that will be flashing. 3. Press the small red tv button next to the ...

...TV, VCR, or other) will turn off. 7)Press the Address button to store the code in the remote control memory. If the code is valid for your remote, the mode light will blink 3 times. 8)Turn the device ...

...3. press TV button, release once light goes on 4. press on button every 10 seconds or until TV turns off - up to 100 times pressing button!! 4. press enter . Now the test... turn TV on - good ...