Question about Saeco ODEA Coffee Makers & Espresso Machines
under pressure and the water never have a chance to pass through the ground coffee. Did t=you check if the valve that goes to the brew group is broken and lose?? also when you try to make a coffee the
water from the head like normal but when I try to make steem, it's not very hot or powerfull. I can hold my hand under the stream and not get burned. The light "!" was also flashing very
...under the steam pipe, open the steamknob on the top of the machine. Let the pump go to there is a steady flow of water then you can close the steam knob again. I´m not sure if you done this already. ...
...under the steampipe and open the steam knob to make a cup of water, when the water comes in a steady flow, then you can close the steam knob again. Hope this will help you. Best regards ...
Question about Saeco ODEA Coffee Makers & Espresso Machines
...water. Does anyone know if I can adjust the grinder maunally somehow? Pull out the main screw or anything else... I already tried to wash the top and pull out the beans and that didnt work. Greatful ...
Question about Saeco ODEA Coffee Makers & Espresso Machines
...water level and temperatrue are both red, not blinking. When you press the coffee button , and the top and bottom lights are flashing, that means the grinder is either jammed or out of order. If the ...
Question about Saeco ODEA Coffee Makers & Espresso Machines
...under the water and it still didnt work. I let the brew group soak in warm water for an hour or so and still no luck. The coffee just wont come out of the two little spouts. I also cleaned out the 2 ...
Question about Saeco ODEA Coffee Makers & Espresso Machines
...water in the cup should be even with the glass lip all around the cup. If it's leaning to one side then your machine (or table it on) needs to be level in order for the spout to dispense evenly. ...
...under the flat coffee pat rejection scoop on the left hand side of the brew group as this is likely to be sticking out. The grounds container has a metal bit in the back that affects a magnet reed ...
...water leaking (brown so with coffee) under the dreg drawer. how I can fix it ? I recently had this problem. I throughly cleaned and lubricated the brew group as directed by the manual. Apparently if ...
241 questions posted
Usually answered in minutes!
179 Questions
33 Questions
22 Questions
1 Questions
2 Questions