Jenn-Air JDS8850AAS Dual Fuel (Electric and Gas) Kitchen Range "replaced oven temp sensor broiler" Questions

Ad

Question about Kenmore Kitchen Ranges

1 Answer

...replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board ...

Ad

...oven replaced ignitor and still broiler works but oven doesnt . lost here since your broiler works, your valve should be good. Since you replaced your ignitor, the only other thing I would recommend ...

Ad

Oven over temp - exceeded 590F with door in unlocked position or 990F with door locked - If actual temp condition occurred, look for welded relay contacts or high resistance connection or any cause in

...oven bake element caught fire and burned into pieces. Replaced with 74004107 Factory part. Still doesnt work. Broiler doesnt work either. Top oven works fine. Thanks. First, pull the temp. sensor and ...

Question about Whirlpool Kitchen Ranges

1 Answer

...replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board ...

Question about Maytag Kitchen Ranges

1 Answer

oven heats up, the broiler comes on normally and lights. I noticed however that the glow bar stays on, even after I left it for ~5 minutes. This doesn't seem normal to me. Is it? If not, what should I

...and broiler work Check the electronic starter/pilot ignition on the bottom oven burner. It may be dirty, too far away from the pilot gas or the temp sensor on the pilot light flame may need

replaced in July 2008. Now the oven temp will not heat higher than 350 deg and must press down arrow to start, plus the broiler works only on low and must also press down arrow. Is it practical to pay

Question about Hotpoint Kitchen Ranges

1 Answer

oven temp been OK until just recently? The range has not been moved or converted Nat gas to LP etc. recently? If yes to Q1 and no to Q2, I'd replace the oven sensor ( WB21X5301) and then reset control

Question about Whirlpool Kitchen Ranges

1 Answer

...replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board ...

Not finding what you are looking for?
Jenn-Air JDS8850AAS Dual Fuel (Electric and Gas) Kitchen Range Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Paul Carew

Level 3 Expert

3428 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...