Jenn-Air 30 in. CCG2423 Gas Cooktop "turning stove top starts" Questions

...top stove knob over 30 seconds before the flame will stay on by itself? .....and the 'low' setting is not noticeably different from the 'high' setting. (Maybe these questions will be answered by the ...

...Stove Top Burners When I turn on the burners of our whirlpool electric stove top cooker they turn on, the after a few seconds they turn off, then turn on, and continues to do this. I turned them all ...

...stove top. When I finished I turned the dial to off. I started cleaning up the kitchen and notice the one of the burner was still on, I turned the knob again and the burner was still on. I unplugged ...

...stove top. Recently, the ignition spark on my GE monogram 5 burner gas stove top, located in my kitchen island just started sparking on its own when all burner knobs were turned off. The first ...

...stove top and the clicking sound of the ingnition sparks started. So, I unplugged the stove top to quiet the noise. I sopped up the liquid and replugged the stove and the clicking noise is gone. Now, ...

...top gas stove when plugged in start making clicking noise and you can smell gas . When you plug gas stove it start making clicking noise and also release gas with out turn it on. on most, your push ...

...stove top lights but turns off after 30 seconds I have the 5 burner stove top KM 3474 with a right super burner which shuts off after 30 seconds. The other 4 burners ignite and remain on w/o any ...

stove top keeps turning off My 18 year old Jenn Air stove top has recently started turning off. Some times flipping the fuse makes it come back on, but not always. There are no other appliances that ...

stove with 6 gas burners + grill on the top and two (one large, one small) electric ovens below. I love this stove, it has been a totally reliable workhorse, and a cook A LOT. Just recently one of the

...stove top or the wiring going to the appliance. Sorry but I would have to see it to see exactly how to fix the problem. the top needs to be removed and inspect the wiring to it. Test the top with a ...