Question about Viking Cooktops
1 burner working, I take you mean only 1 ignites, then it sounds as though you have an issue with the spark module being defective. There is usually an access panel on the bottom of the unit, although
...1 burner does not light automatic just installed new Kenmore lp gas cooktop- all burners but 1 ignite correctly-electronically- 1 burner will light with a match but not electrically find the spark ...
...at the same time. Problem #2 I smell gas leak coming out of # 1 burner when not in use. burner 1 is the tap assembley reqs., greasing with graphite grease. ignition depending on model this is
Question about Jenn-Air Cooktops
...1/2 years after I bought it so the warranty on labor has expired & I don't trust A & E Factory Services to come & fix it. Any advice would be appreciated greatly! Jenn Air uses a reignition system on ...
...1 a simmer control, 2 electric solenoid, 3 potentiors. When you turn on the burner the potentior tells the simmer control to send power to the gas solenoid. At the same time the unit will spark. If ...
...a micro over it. From the bottom of the upper cabinet to the top of the burner frames you need 33 1/2 inches and from the bottom of the micro to the burner frames you need a minimum of 16 1/2
...1 of the affected burners has to be lit for all three the spark. Any suggestions? Hi, Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting. Cooktop Range ...
...burner on my jenn air ceramic cook top . it has the down draft feature in the centre 1) turn off power at the breaker. 2) remove hold down screws 3) pop up cooktop out of counter top 4) remove knobs ...
Question about Jenn-Air Cooktops
...1 burner lights I have a jenn-air sealed gas cooktop jcg8430. The back right burner sparks and ignites, the other 3 spark at the back right burner when the individual knobs are turned on, the 3 will ...
9 questions posted
Usually answered in minutes!
268 Questions
118 Questions
87 Questions
55 Questions
38 Questions