...ignitor sparking will not stop in after the The ignition sparking will not stop after the flame lights no matter which position the control knob is in, except off. when you turn the knob or push a ...
ignitor stuck on burner An ignitor is used on a GAS burner - NOT and ELECTRIC one! Are you sure you are giving us accurate information?
...ignitor altogether. Hi, Here is a tip that I wrote that will help figure out why the burner spark keepson clicking... Gas Range Repair Burners Keep on Clicking heatman101 Might Be Moisture Got to the ...
Question about GE Cooktops
...ignitor and replaced it none only one of the ignitors worked and the current was going to this one burner regardless of which burner I turned on. Electric gas igniters sometimes get stuck in one ...
...stuck ignitor switch. they are mounted just below the knobs. you cant get to them until you remove the unit and then the top. if you spilled water or something boiled over, it could get into the ...
ignitors on all 5 rings wont stop sparking Whilst cleaning the item the ring ignitors started to spark and eventually tripped the electricity which cut off. All rings checked and gas controllers ...
Electric ignitors spark continuously on my Gaggenau gas cook top you have a stuck switch....
...ignitor or spark module is an electrical switch with electrical contacts which are stuck one either by long time use or by hunity, water, or spilage over. You can try to use a hair dryer or leave it ...
...ignitor keeps clicking even when no switches are turned on. The rear burners also are not lighting. I've verified wiring according to the schematic and (re)seated all connections. Everything looks ...
...stuck in one position causing the clicking sound. the clicking sound that you hear is the electric arc that is pulsing from the ignitor conductor (wire) to ground (the gas burner). It receives power ...
47 questions posted
Usually answered in minutes!
268 Questions
118 Questions
87 Questions
55 Questions
38 Questions