Kenmore 57029 Side by Side Refrigerator "divider hot" Questions

...hot surface on divider between sections the divider is too hot to touch and the gasket is getting stiff where is contacts the divider. As a result the seal is leaking and the frig is constantly ...

...flashing & changing. usually when the center divider is hot to the touch, it means that the compressor is running hot. either your compressor fan is not running or it is stuck or running too slow. ...

Divider red hot Fridge and freezer are working fine, temperature-wise, but the divider is red hot. It was making a very strange noise recently too. Any suggestions? I'm not familiar with the Samsung ...

...divider gets real hot is it normal for the middle divider to get real hot? Any heat inside a refrigerator is a not so good thing, firstly you have to assertain if the thing is in defrost or not, they ...

...divider is very hot what should I do to fix this problem? Hi, This would be due to the condenser coils being too hot, either dirty or a failed fan motor. Please follow the link below for instructions ...

...divider gets hot, it usually means there is inadequate air flow over the condenser coils outside the unit. When the compressor is running, check for air blowing under the unit. If no air is moving, ...

...divider gets very hot but only on side facing door. Frig stays cold and freezer still makes ice. is it worth fixing? Clean the condenser coil underneath the dust bunnies keep the coil from cooling. ...

...hot divider strip. My concern is the compressor will overheat and other things will get damaged, etc. the fan pulls the hot air away from the compressor and coils. I thought about just wiring the fan ...

...divider is very, very hot. Can this be fixed? The condenser coils may need cleaning or the condenser fan might not be running. This is easy to check this link should help you out ...

...divider between the two compartments of our model106.51564103 is very hot. Hi, This is caused by the condenser running hot due to being dirty or a fan failure, see the link below for instructions and ...