Question about GE Kitchen Appliances - Others
...water to machine. I unplugged the solenoid valve and ran a line cord to the solenoid.I plugged it in and the valve opens and water goes to the ice maker. Apparently Ice maker is not sending power to ...
Question about Kitchen Appliances - Others
If not then make sure the water solenoid is getting power call from board to solenoid, if getting 115v to coil and slow to no water to sump then replace valve, if no power to valve then replace board
...solenoid, and water hoses. If one of the solenoid in there malfucntion then water wont get in cuz the valve wont open. Check the resistance of each solenoid which should be a few couple of hundred ...
Question about U-Line Kitchen Appliances - Others
...water valve solenoid (red and white wires) You can safely jumper across the bin thermostat long enough to see if you get a higher voltage on the water valve solenoid. If you do then the thermostat is ...
Question about U-Line Kitchen Appliances - Others
...solenoid-operated water valve. This allows water to flow through the valve and into the ice cube tray. The water is frozen into cubes, and the cubes are dumped into the ice bin. As time passes, ...
Question about U-Line Kitchen Appliances - Others
...water solenoid . Compressor is working fine. Double check your connection and confirm that power is present at the solenoid. If power is present, do a continuity test of solenoid coil. If the coil ...
solenoid water supply valves seat used rubber which could become water logged and swollen. If this is the problem you need to replace the solenoid water valve. These water solenoid can be ordered from
...water valve solenoid with a volt meter to make sure your getting power applied when calling for a fill cycle? if you are getting power and you can hear the water valve make and not getting water into ...
...water you will have to check with a volt meter at solenoid for 115v at the beginning of cycle. if you have power there than pull water supply line off of valve and check water strainer in back of ...
...water supply line leaking at solenoid valve inlet side. Tighten or replace fitting, if not there than check water line leaking at solenoid valve outlet side, If so than replace water line and
489 questions posted
Usually answered in minutes!
23 Questions
