U-Line Icemaker "ice tray stuck" Questions

...ice is stuck in the tray because the heater element has not slightly melted the ice so it can be pushed out of tray. Check for continuity of element and/or proper cam operation (motor that controls ...

ice tray/bin, and the tray/bin can't be removed until the unit is turned off and defrosted. The unit works great except for the overfilling (?) problem. Is they're a regulator to deliver less water to

no ice in my ice o-matic model ice220ha1 no water entering ice forming tray no/low gas charge hot gas valve stuck open no sprayer pump working or paddle wheel drive motor not working

water doesn't shut off in ice making tray could be a bad water valve or the ice maker in side is stuck

...ice maker water never shuts off water over flowsmfrom tray It's supposed to run down the little gray stand pipe and down the tube to the drain. But, if it's going over the side them the unit is ...

...be just ice melting. If not can you here water filling up constantly while machine is off? if so is it running over sump tray into ice bin. if dump valve was stuck open then machine will not make

...stuck. Is this a new ice maker and desighned for your refrigeratorr? Sea Breeze The cycle is not stuck. If the unit is still running (freezing) then the thermostat is set too cold or it could be a ...

...ICE ON THE BOTTOM PART OF THE TRAY ONLY AND KEEPS BUILDING UP AND THE TIMER DOES NOT ADVANCE TO HARVEST CYCLE. MANUALLY WHEN YOU ADVANCE THE TIMER IT HARVESTS AND THEN AGAIN IT GETS STAYS IN SAME ...

...ice maker? Does it just pull out or is it fastened somehow? It seems to be stuck. I did not want to just **** it out if it has something holding it in. This is on a WCM48 model U-Line. I found out ...

...ice and refill the tray.....just wont dump when it freezes I've maker makes ice but won't initiate the dump cycle on its own. I'd I push the button on the bottom of the unit it will dump ...