U-Line Icemaker "ice maker making thin" Questions

...ice maker that cycles but will not make ice. What could be wrong? I cked compressor, hot gas bypass, cleaned condensor coil, ccondensor fan motor running and unit cycles like it should. I havent ...

...thin white edged ice, and not much of it. I have pulled the unit to make sure water flow is good and it is. The unit was turned off for several months. I cleaned it twice with the solution. Is this a ...

...making ice and make sure all the ice drops. If it doesn't size it down more. If it all drops and the ice is too thin, turn it up VERY little (2° or so). Keep adjusting until you get the size you ...

...level be and how would you adjust the water level sensor. My machine runs out of water. It makes paper thin ice an wont get thick enough to tell sensor to dump Check solenoid for proper

...Ice maker is not making ice. I have cleaned with approved cleaner for the clean cycle and it does not seem to help. The water just seems to flow over the freeze plate and periodically a thin sheet ...

...making very thin ice? Short freeze, thine ice. Cause: Grounded ice thickness sensor. Solution: Check sensor for dirt and position. Clean and adjust gap to evaporator surface using 13/64" drill bit as ...

making very thin ice - called a GE guy out and he said we needed to replace the water intake valve - we did and solved the problem until this month and it started making the chugging sound and limited

...making ice. the cubes are very thin although i adjusted the knob to the maximum thickness. Sometimes it works for a day or two then stops again You should never have to adjust it to the highest ...

...RUNNING OUT THE DRAIN DURING ICE MAKING PROCESS TRY AND CLEAN PURGE VALVE OF ANY DEBIS, ICE SENSOR SHOULD BE 3/16 OR 7/32 AWAY FROM EVAP (GAP) ,ALSO GENERAL MAINTENCE IS VERY IMPORTANT FOR ICE ...

ice maker making too much ice? Machine continues to produce ice causing it to overflow when I open the door There is ar thin metal bar that checks for the level of ice on the bucket if the bar is bent