U-Line Icemaker "getting power" Questions

...if you are not reading 115 volts from one terminal to the other than it is not the pump. your not getting power to the pump. make sure your getting water to sump tray if no water then pump wont

...tray but not pumping over condenser red light on control bd Check to see if you are getting power to water pump if you are getting power to pump and the pump is not running then replace water

...getting power applied when calling for a fill cycle? if you are getting power and you can hear the water valve make and not getting water into the sump tray then have you checked the water filter? ...

...Freeze portable Ice Maker Will not turn on When I push the power button sounds like control problems or power to ice maker not there plug something into the wall socket to see if it is getting ...

...POWER GETTING TO UNIT U-LINE ICE MAKER #ULN CLR 60 WH-00 WILL NOT START UP NO POWER realized that there was nothing wrong with the unit....It is suposed to drain out water when running and need to ...

...getting power to cutting grid and it's not getting warm then cube let cutter grid is bad. If this needs to be replaced you might thank about a new machine the cost for this part is around 480.00 part ...

I have a Uline (Old) replaced selioid valve. Freezes fine. water does not pass through the selinoid. does the solenoid get power The icemaker doesnt call for water until the thermostat is satisfied. ...

my CME256as scotsman ice machine will not power on Check with a meter to make sure your getting power the the controller if you are then replace the controller.

If not then make sure the water solenoid is getting power call from board to solenoid, if getting 115v to coil and slow to no water to sump then replace valve, if no power to valve then replace board

...it is under the cover and is it replaceable? My machine when plugged in seems like getting no power, no lights or nothing. the fuse is very hard to get to so take it to the refrigeration