...built in with the trim kit. Is there a reset button. It is 5 years old. Should I buy a new one or try to get it fixed. I am fairly handy myself and can follow trouble shooting instructions.\r\nInez ...
Question about Jenn-Air Microwave Ovens
...built in Jenn-Air Microwave, oven combo unit is on the fritz. I *think* the JMC7000 diode is bad. I want to test it, but removing the microwave from the housing seems challenging. After taking on the ...
...built-in ovens) or unplug the range before attempting the replacement. The replacement sensor will come with instructions, but basically it's a matter of removing the sensor, pulling out the wires to ...
built in 2005 The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again. If that doesn't work, leave it unplugged for about
...built in Microwave JE1640 works only when holding the door open switch. You have to hold the switch oh, so right. You press the switch too hard, the door opens and the microwave is off. You press the ...
...built in Monogram Advantium Microwave oven Model KSC1001. The interior halogen light burned out and had to be replaced. GE service wanted $138 to come out & service it. I tried to find ...
...built in Microwave] A loud buzz, hum, or groan is usually a shorted high voltage rectifier diode, but a sound like gurgling into an empty coffee mug is one symptom of a failed magnetron, and yet the ...
Question about Kenmore Microwave Ovens
...built-in microwave and oven combo model #GMC305. I have a daily problem with the microwave shutting off while in use or not starting at all. It happens most often when we push the START button - The ...
162 questions posted
Usually answered in minutes!
43 Questions
39 Questions
46 Questions
26 Questions
28 Questions
