Shure (LX287CC) Professional Microphone "apart sm58" Questions

...sm58 grills Did you try to unassembled the microphone? Get the top section off, and then take it apart to separate the transducer. Some of these models are a task in themselves to take apart and ...

...sm58 capsule is very hard to get apart without damaging the contact surface. You would have to take the contact side apart 1rst bend all the little tabs away which hold the brass plated disk in place ...

...apart on the sm58. On page 2 of the user manual there is a wiring diagram to reconnect wires. the grill wind filter part screws on. The socket on the bottom is secured with a screw. I am more than ...

...SM58 not working. Tried on various pieces of equipment using various configurations of cables and not a sound. Took unit apart and all wiring appears to be intact. The mic has been unused for several ...

...sm58 mic and it was dropped. It will work but I have made it fail a couple times. Under which circumstances did it fail? Might be due to internal wiring getting loose or a damaged capsule after you ...

how do you take a sm85 microphone apart Unscrew the top portion with your hands to expose the capsule. The connector at the bottom is unscrewed with either a small phillips or slot screwdriver.

I need to learn how to disassemble this mic. Please tell me how to take it apart. Thanks On the LX2, follow these instructions: 1) unscrew the microphone cartridge 2) Pop off the switch actuators 3) ...

...sm58 from my friend... I was cleaning the dust on the mic, and I unscrewed it but then it doesn't work, the internet says that the green and yellow wires are usually disconnected when unscrewed... ...

...sm58 wireless mike, 9v battery connection flaky when I move the 9v battery and hold it a certain way it works. Would like info on how to take mike apart to check 9v connection. Thanks, JERRY Unscrew ...

SM58.. I'm concerned about a sound more and money.. I don't wanna blow $100 on an SM58 only to take it apart and then throw it out the window.. (please let me know the answer at [email protected]