...Remove the Top of the player by taking out the screws at the back and sides 3.) With the player opened up look for the disc drive , there should be a cover above it that can be removed by removeing ...
...remove the metal cover over the top, screws are on back and sides, sometimes top. after you get it open the cd mechanism is wide open. Remove the magnetic lock bearing from the top of the cd spindle. ...
...remove the cover and check the voltage on the power supply. Likely you will find that a few capacitors on the power supply have leaked onto the board, or are bulging on the top. If you can replace ...
...back and could see a red light on. I inserted a casette and while it cycled the tape into its "play" position, that was the last sign of life. Not even the red lamp glows now. My computer tec, who ...
Question about Sony Televison & Video
...Remove the screws that hold the top case on the dvd player. There will be a couple of screws on each side of the player and a couple of smaller screws on the back. They will most often be BLUE RAY ...
...back in. 3. Remove the top cover of the unit. Remove the front plastic bezel from the unit (should be clipped on). 4. I am not familiar with your particular model but you will probably need to loosen ...
...remove what's left of the pins from the printed board and with a solder sucker or desoldering braid, clear the holes ready to accept your new regulator. Be careful because if you over heat the print ...
Question about RCA Televison & Video
...remove componets from the aboard. The power supply is the smaller board to the right of the dvd tray. The capacitors brake down and lose some of the cap MFD value. The capacitor that went bad ...
53 questions posted
Usually answered in minutes!
391 Questions
300 Questions
256 Questions
225 Questions
178 Questions