Thomson 29DM400 29" TV "repair wet" Questions

...wet! This will cause a short and something will burn out on it. It is possible that after drying the set out completly for at least 24hr, thet the set will regain funcions. It must be completly dry ...

...IS FUSSY AND IT KEEPS GOING ON AND OFF. wHATCOULD BE THE PROBLEM AND SHOULD I CALL A REPAIR PERSON? disarm it and dry it with a hair dryer. if you don't plug it wet, maybe you have luck. and good ...

...water it will be ok once it dries out if replacing fuse didnt work power supply might need to be repaired or replaced good luck! But what if it was soda would it be

...wet. Now it causes interference. Do we need a new remote? The short answer is yes! when electronics take on water the results in most cases are not good, the ic pins start to corrode working it's ...

...wiping them off...which appeared to maybe make them worse...is there any hope for this tv being repaired. The TV was my boyfriends sons Tv and he recently died and it is sentimental to my ...

...wet atmosphere perhaps. Pl.help me. This is NOT your service centre site and you have made a complaint to the wrong forum but I shall help .Your repairer unfortunately is not sure of the fault and ...

...wet) is in it and the look for a fuse. This sounds like a blown fuse. If it is replace the fuse, make sure the TV is dry and then plug the TV in and observe what happens if the TV plays then the ...

...solder strip or solder joint. Flex board slightly if necessary to aid in finding the break. 3.) repair it using solder iron and flux solder and scratch copper conductor slightly to aid in

repair man to have the switches replaced, or the whole cuicuit board. He took one look, sprayed the whole board with WD40, and said try that! When I put it back together, the on/off button worked, but

...some technical background and a couple of test instruments, you will not likely be able to do the repair yourself. Modern power supplies are designed to shut down if the current drawn exceeds the ...