Quantum Fireball Lct20 40 GB ATA-100 Hard Drive "hard drive jumper settings" Questions

...hard drive for a 'slave' ? You need to set the drive as a slave by moving the jumpers the the correct pins. You should see 4 sets of pins, for slave you put the jumper over the second set of pins. ...

hard drive as a second drive on a PC. You want the drive to be the slave drive, and you know what that you must change the current jumper settings. The four jumpers on the drive are labeled DS, CS, PK

...hard drive i need to know what jumper pins i need to cover or pull out hi ronrayhall, I installed a maxtor hard drive, and they are shipped with a default of cable select. If you have this hard drive ...

...http://www.helpwithpcs.com/upgrading/install-hard-drive.htm You have to set your primary HDD as Master and set the 20 Gig as slave. Look on each HDD for correct position of the jumper **** can ...

hard drive quantum fireball lct 20 please i nedd to know how do i set up this hard drive as slave, i need to move the jumper to the coreect posicion. thank you go to quantum website, download manual, ...

...hard drive. i want to set it to slave. how do i set the jumpers? on maxtor drives, you will find the jumper within a cluster of 9 pins. if you look on the bottom of the drive, on the circuit board, ...

Jumper settings trying to figure out the jumper settings Please visit this link http://stason.org/TULARC/pc/hard-drives-hdd/quantum/FIREBALL-ST-4320S-4310MB-3-5-SL-SCSI3-ULTR.html

...hard drive Jumper settings for Seagate and Maxtor IDE (ATA) harddrives, http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=196299&NewLang=en Follow the chart examples under the ...

...hard drive so its the slave Jump the middle pins, second set from the right when looking straight on with the power connector on the right. Worldvet reading pins left to right: second set of pins, ...

...jumper contactor, nevermind just use what ever conductor cable to roll between the two pin and make sure the pin is connected that all. YBC (/\) Hello! Here are your jumper settings: Hope this