D-Link DES-1008D 8-Port Ethernet Switch (790069217708) "hub" Questions

...CONNECT TO A SYSTEM, ITS NOT WORKING When the computers are powered up and connected to the D-Link hub, the computers that are connected to the hub will light up the various LEDs on the hub to ...

...it's not working....Good Luck When the computers are powered up and connected to the D-Link hub, the computers that are connected to the hub will light up the various LEDs on the hub to ...

hub hello i have a hub d link Des-1008D, my problem is that before my connection from router to my comp had no problems.....then i used a hub in between router and my pc now my net gets cut every 40 ...

PROBLEM WITH MY HUB DES-10160(D-LINK) tHE HUB GOES ON AND OFF SUCH THAT i GET A MESSAGE THAT LOCAL AREA CONNECTION IS UNPLUGGED OR PLUGGED Yes the LAN will report plugged and unplugged when the hub ...

there is no connection to the other pc 3 ethernet cables 1 ADSL modem and 1 hub is needed to network computers together. 1. connect telephone cable to modem and switch it on. 2. one end of an ethernet

...and a D-Link DIR-300 Wireless-G Router my problem is after I attach 7 computers on my switch hub. I only have limited local network connection my internet is not connecting to my network hub. ...

how to connect switch hub Instructions Plug an Ethernet cable into the back of the hub. Connect the other end into the back of the switch. Power on the switch by connecting its AC adapter. It should ...

DES-1005 in HUB working mode? I'm trying to analyze a networking problem with wireshark, but only have a D-Link DES-1005 switch at hand. Is there a possibility to set this device into a hub working ...

...to the WAN port on the router and the ethernet port on the router is then connected to the hub/switch and the computers are then connected to the hub/switch. The modem gets an unique IP ...

...IP address of D-Link DES-1024R for accessing from PC for switch management? the usual ip add of a Hub or Router or Switch is either 192.168.0.1 or 192.168.1.1. to determine the Ip Add you can check ...