Question about Spidem Coffee Makers & Espresso Machines
...brew group put of the machine? Hi Remove the dredge drawer as far as you can. Open the door. On the left side of the brewing unit, and towards the back of the brew group, there is a single screw. ...
...put the brewing unit back to the machine. Hi Remove the dredge drawer. Open the door. On the left side of the brewing unit, and towards the back of the brew group, there is a single screw. Remove the ...
...Put in your brew group and you are good to go. If this problem persists you need to send it in for service. Because no logical reason the error “BREWUNIT BLOCKED” appears also when the cup heating ...
Question about Saeco Coffee Makers & Espresso Machines
...put back the brewing component to the machine. How can I click it back? I know the machine clicks it back from the hole that connect the machine and the brewing, but I can't turn the whole without ...
Question about Solis Coffee Makers & Espresso Machines
...brew group and it eventually starts again but no luck so far Hi First off put everything back in the machine (drip tray, dredge drawer, and push the brew unit in till you hear a click) then close the ...
...brew group" has broken. Here is the problem. When I make the espresso in the morning, the unit does the grinding and starts to put some espresso in the cup. it only puts a small amount though, not ...
Question about Saeco Coffee Makers & Espresso Machines
...put power on. The axe of the group changed a bit and is not fitting with the group position anymore. How can we change the axe manual ? thanks. First step: You need to make the machine think that the ...
...brew Group will slot back in, but it will not 'reset' after switching off / on. Can you help please? Regards, Neil Hi Neil, Try to put the dregsbox and driptray on place, close the door and turn on ...
Question about Coffee Makers & Espresso Machines
...power on the machine. When the machine not make any noise, open the door and put in the brew group. I voted "no" it didn't help and then tried 2 more times. It's now working again. Thank you,
Question about Saeco Coffee Makers & Espresso Machines
...brew group would not slide into place. I don't want to force it because I'm worried that something may break. Please help. Thank you. Hi, Put in the driptray and dregs box to the machine, close the ...
149 questions posted
Usually answered in minutes!
572 Questions
236 Questions
110 Questions
75 Questions
58 Questions