Gaggia Classic Espresso Machine "shower head stick" Questions

...SHOWER HEAD WILL NOT STICK I HAVE SUCTION CUP SHOWER HEAD HOLDER AND NOW WILL NOT STAY STUCK ON THE WALL Make sure you clean and dry the wall that you are sticking the shower head to. It is OK for ...

...shower head, but it won't drop down as it should. i have only just purchased this machine second hand it hasn't been used for sometime. Everything seems to work but the shower head sprays EVERYWHERE! ...

...likely, the valve needs unblocking. If it doesn't, the solenoid needs replacing. Either the brew solenoid is bad or the shower screen is blocked or the metering jet on the top of the head is

...shower head" where water enters the coffee, the housing for the coffee, etc? I have to rinse the entire thing out, which takes too much time! I have tried positioning the coffee filter and filter ...

...shower head there is no central bolt as desdribed by David - but 2 large and 5 small holes? No screws in sight... I am fairly certain you have a problem with your solenoid valve. See this post. It's ...

SHOWER SCREEN WON'T RELEASE AFTER REMOVING SCREW Stick a thin blade up into the edge of the screw hole and try and flick it out. It may happen easier if you get the coffeemaker up to temperature. It ...

...to just get rid of the coffee grounds stuck to the group shower head and leftover coffee in the group valve. Does not hurt the machine and keeps everything working smoothly. Aloha, youtube; ...

...shower head. I need further instruction on where and how to clean overflowed grounds. The problem may be caused not by a check valve in the inlet hose. This little gadget, about an inch inside the ...