removing the hex screws from the table fan Seems the two hex screws have a bump in the middle of the screw which will not allow me to get any thing in the screw to remove it..... you need a security ...
...to on the low and medium speed, but not on high speed. As for the cover, remove the three 'visible' screws. There are two screws in the handle, but you have to remove the plugs that are hidding the ...
How do I clean a Hawaiian Breeze tower fan? Unplug fan. Lay the fan face down. Remove the four screws holding the stand to the base. Slide the stand all the way off the cord. Look at bottom of fan and
...off to replace the light bulb. Any suggestions. If it is a dome light then there will be 3 small screws tha screw into the dome at the very top, spaced evenly around it. The friction from the ...
...dust accumulation on the blades, and need to know how to open the housing to clean. There are two screws, on the top and bottom, that are irregular. The rest of them are Phillip Head screws. How do ...
how do i open the fan it doesnt have any screws n it stop occulate remove the screw on the sides, then CAREFULLY remove the top of the grill, remove the screw of the speed control, then you finally ...
...the fan. I followed the instructions posted and I still couldnt open the tower. I removed the two screws on top (behind the buttons); 8 screws on the base (bottom most and the one holding the base ...
Fan WORKS FINE but has lots of dust and mold inside that needs to be removed,and I've taken the screws out, all except the one near the base, located right above the LABEL. This screw, a Philips ...
2 questions posted
Usually answered in minutes!
437 Questions
165 Questions
157 Questions
101 Questions