...a solid-state remote device and the manual warns not to use a solid-state remote device. Why do you think it would come with a device that they warn you not to use? Try swapping out the bulbs and see ...
...states do not connect either of the black wires to the white. The green/yellow wire is the ground and I connected that to the ground. The 2 blacks I connected to the 1 black outlet wire but what do I ...
The fun does not move the air I detected that the inclination of the blades are almost plane, So, I think that if I put some washers in 1 of the screws, they will inclnate a lite bit more the blades ...
...8 of these Hunter fans and I have installed the Home Depot ballast on two if them so far, but I think that I will order the solid state version as a spare for the next
I am trying to fix an Oscillating Tower Fan. My 1.5 year old Black & Decker BDTF1010B tower fan wants to cut off after a few seconds of use. I am thinking it is either the connections with the control
...wire Are respective for the: High fan motor speed Medium fan motor speed Low fan motor speed I think the gray wire goes out to the oscillator motor. The Red wire is marked as Line, for the power ...
...this could be normal, as the power would go through the circuit before turning on the light I think it's normal. I just installed 3 ceiling fans today; 1 with single gang switch, the other with ...
...states "larger motor for increased air flow". We have installed this in a room with a vaulted ceiling and the air flow is just not there. Our 52" fan was 100% better. Plus the light kit is a special ...
11 questions posted
Usually answered in minutes!
437 Questions
165 Questions
157 Questions
101 Questions