turns the light on by itself and also lowers the fan speed after a while by itself, otherwise they both work normally. Thanks you, Roger change the frequency on both so they are not the same they have
...ceiling fan... the globe will not come off and the whole shaft turns if I try to lift and turn the only part that looks like it comes off I appologize in advance for not having absolute, 100% ...
...itself to make sure they haven't been accidentally set to the off position. Shut off the power. Loosen the screws on the cover or canopy that that will allow access to the wiring compartment in the ...
...even after turning the circuit breaker off and back on. The fan itself does not come on at all. I double checked to make sure the wiring was correctly followed. Did you make sure the wire nuts were ...
...even though it came with a remote. See if you can find one a give it one pull, that should be the high setting and that's what it should be set on to operate properly with the remote. Another ...
...Ceiling Fan w/ Remote, the model number on the remote is UC7078T. I would love to have my celing fan working again even if it's without the remote. Before you try all of that try the on/off switch, I ...
...ceiling. You have a bad ground, be carefull this could lead to a big shock if there ae any bare wires in that Unit! I would turn off the power at the fuse box to this fan and remove it and check for ...
...itself. Even if I take the battery out of the remote control. Why? Can it be fixed? change the capacitor I had the same problem with my light. I changed the code on the receiver and the remote and it ...
Question about Hampton Bay Dryers
...itself, however, it would not respond to the commands of the remote. I checked, rechecked, and rechecked, again to see if I wired it properly, and I did exactly as the instructions showed. I can't ...
37 questions posted
Usually answered in minutes!
251 Questions
153 Questions
60 Questions
24 Questions
