Hampton Bay 73554 Antigua Ceiling Fan "motor not turning" Questions

the motor wants to run but the blades are frozen-will turn by hand but not freely Spray the bearings with a little WD-40 if the fan turns freeley with out any power applyed then when the power is ...

...works great but when you turn on the fan wall switch the blades will not turn by themselves, the motor hums so I know it is trying to work. There is no binding of the blades and I can spin the ...

motor hums but blades don't spin It should have something in motor block blocking the motor to turn. when it is OFF position ,you try to turn it by hand to see if it spins freely or not ? You may hear

...motor is not turning,, then the motor is bad. but there is one more thing that I could think to check and that would be to make sure that you have power on the hot and the neutral wires -- as there ...

...blade is not turning? The motor has a D shaped shaft. If the hole in the blade that the shaft goes in is rounded, then the blade will spin. In that case you need a new blade. Vornado can supply

need replacement motor hv9c fan, motor does not turn or hum when plugged in, shaft turns freely when spun by hand. do you have a replacement motor or know what "c" frame motor will replace? this is 9 ...

The motor will not turn any more. I can turn by hand but it will not turn with electricity. your motor is to weak to start on its own, sorry to say but you will have to get a new one for no more then ...

...ballon string got stuck and I took the string off and now it won't turn on You probably burned the motor up. Or.. there is still more string in there. Take the fan apart, take the motor out... try

...turning the fan motor by hand if it does not turn freely it's lubrication I have answered this another post. more than likely it is lubrication spray WD-40 into the oil holes after you have unplugged ...

...motor and turning it so they slip apart. then once the motor is apart, shine up and clean the motor's shaft so it is clcan and shiny. then do the same for the bushing/ beringholes in the motor's ...