Acer Aspire™ T180 PC Desktop "set" Questions

How can I recover to factory settings on Acer Aspire M3400? if u r saying setup setting go to setup and loaddefoalt setting and set boot divce again and othere setting if you want if fix your problem ...

out of range message after acer system restore. how can this be fixed? Start-up in "Safe Mode". Set the video-resolution to 800-by-600 at 60 Hz. Shutdown and reboot. Set the video-resolution to ...

i need to set my dimension c521 to factory setting dont have disk tried f8 f11 and f12 nothing will let me set back to factory setting to get into the bios...try the DELETE key ...tapping on it when ...

...but acts like it can't find operating system. Can access Bio's with F8 button. Am able to change settings but I am not sure what it should be set to. set the bios to the default settings...

...says "starting windows" once in safe mode navigate to the controll panel, select DISPLAY, click the settings tab at the top, In the screen resolution box , set it to a lower setting , restart, if it ...

I need to restore my Acer T690 to factory setting. The acer had problem booting so I used windows XP bootable disc and it had replaced the operating system. I have recovered my data. Now I need to ...

...an option for your specific graphic card in the box that opens click that. Otherwise select the settings tab then advanced There should be an option here specific to your card use that. Nvidias ...

...DMI POOL DATA............. DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER I checked the BIOS settings and they are correct. I'm guessing the controller on the motherboard is going bad or has ...

cannot change the BIOS on an acer aspire M3630 cannot boot from cd to upgrade to windows 7 You can change bios setting according to your requirement and you can set password on bios setting .

...am adding is the exact specs as the one in the PC. I have updated the Bios to the newest P01-B4 and set to default with optimal settings. I do not see any option to adjust memory settings in the bios ...