Acer Aspire™ T180 PC Desktop "raid 1 recovery" Questions

...1: buy a usb floppy drive 2: find some sata drivers from the internet http://support.acer-euro.com/drivers/notebook/tm_6291.html it doesnt matter where there from, you will find they are the same ...

...raid to sata like mine so I don?t know if its from him pulling it or something else is wrong? I don?t know how to check the mother board other then obvious cracks or burnt circuits or check the cpu ...

...RAID. save your seetings and restart your computer. if problem still exist... Follow this steps.. Step 1: If you have a USB stick with capacity of 4Gb and up or another hard disk... try installing a ...

...Raid 1 can be normal, degraded for failed. If the RAID array was RAID 0 and one of the drives failed, then all data is lost and you'll have to create a new array then reinstall Windows and drivers If ...

RAID-1 failure on Dell Dimension 9100 Desktop I have a Dell Dimension 9100 Desktop using RAID-1 with 2 160GB HDDs, Intel Matrix Storage Manager ROM v5.0.01032 1CH7R. Bios indicates RAID has failed ...

...1:- Bios upgrade, go to dells website and download the latest version of the Bios, these are usually windows executables, but you can also launch then from a DOS boot disc of if u have a ERD disk you ...

1, 2, 3, not found and Raid. Found the repair desk. Entered it, and now have message "loadiing DRMK Version 8.00", but don't know what to type or do next. Help!!! Hmmm, what concerns

...Raid configuration If you have the original Windows Install disk, you can boot off of that, choose the Recovery Console option, and once you are in the Recovery Console, run "chkdsk /r c:". The error ...

1 and no RAID); CPU Cooler: Cooler Master Hyper 212+, with 2 fans); Case: Cooler Master HAF X; DVD: hp bd24i (8x BD-ROM/DVD Writer Combo); HELP! make sure all the power connectors are connected to the

1.be sure bios is set to boot from cd (see your boot screen for prompt to enter setup.) 2.insert cd and reboot you should be prompted to "hit any key to boot from cd" 3.hit any key 4.follow prompts if