...HP photosmart printer. Disconnected the printer and computer booted up straight away with no problem. Hope this helps. I got mine to work again. I just unplugged everything except the monitor and a ...
Question about Acer Aspire Computers & Internet
...HP Logo screen HP IQ770, on startup the screen displays the HP logo, and the Boot Menu, Setup, and Recovery options. Keyboard locks up with the Num Lock when any key is pressed. Touch screen beeps ...
Question about Acer Aspire Computers & Internet
...HP Pavilion Media Center it freezes at logo. Upon turning on my HP Pavilion Media Center TV PC M7360n, the blue logo screen with esc=Boot Menu F1= Directory (or something of the sort) and F10= System ...
...freezes on the hp logo, or it will go to a blank blue screen...what can i do to fix this?? sounds like a software issue, probally got a bug somewhere, or else maybe your drive has gone bad(common). ...
Question about Acer Aspire Computers & Internet
...freezes at that point. Hi, Assuming that you didn't do a fresh install of windows, Do this: When the blue screen with the HP Invent logo appears, press the F10 key on the keyboard. (You have only a ...
...freezes with HP INVENT LOGO ON SCREEN. any suggestions? at the start up press F8 within 5 seconds and then select las t good know and then restart the computer if this does not help you may have to ...
...HP and Intel logos and four options listed which were: <F10=Setup>, <Esc=Boot Menu>, <F11=System Recovery>, and <F9=Diagnostics>. Pressing either F10 or Esc resulted in the ...
Question about Acer Aspire Computers & Internet
freezes on the HP my hp pavilion a1330n computer freezes on the HP logo blue screen ... My computer crashed so i had to shut it down unpropertly by the switch. After i did that i turned it back on and
...logo screen, and will not allow you to even get into the BIOS, or boot off the dvd drive. I have tried removing the ram and replacing. Mother Board is working since it notices the missing RAM. Power ...
...logo and high lighted (safemode with command prompt.) As soon as we hit enter ... the screen goes blank, but the harddrive light stays on as if? Am I supposed to wait, if so, how long? If I boot up ...
1,189 questions posted
Usually answered in minutes!
5,472 Questions
2,719 Questions
2,468 Questions
2,231 Questions
2,165 Questions