Dell Dimension XPS 400 PC Desktop "cd eject button" Questions

...also eject the tray from the system. Double click on Computer or My Computer. Where you see your CD/DVD drive right click on it and select eject from the sub menu. The CD/DVD tray will eject.

...cd drive not able eject. please help me you can find the eject button immediate right to the F12 KEY.(THIS IS FOR DELL PP39L LAPTOP) IFit helped u say thanks.. Just look well beside the button in the ...

...CD/DVD (usually near the eject button) push the paperclip right in that hole to manually eject the tray. Good luck There is a pinhole on the drive. Use a paper clip then press the button in the ...

...will see a small pinhole use a pin and insert into that, the cd drive would eject, ITS A MANUAL EMERGENCY EXIT BUTTON ON ALL CD/DVD DRIVES, INCASE THE CD DRIVE DOESNT EJECT normally as your case ...

...eject my cd from my studio computer? Assuming the normal eject button isn't working.... Shut the computer down. Do not just re-boot. Wait at least two minutes, then start the machine again. After it ...

eject a cd when done How do i eject a cd when done If you can see the small button on the right hand side just below the tray or you CD/DVD Rom, press there, it'll automatically eject. Refer to this :

...eject button on my Dell laptop. There is not a button close to where I insert the cd near the power button theres the eject button the one that that has a triangle and line underneath. hope this ...

...eject my cd's from my new Dell Laptop Studio 17. If you are not knowledgeable on this then please let me know It's very annoying they don't tell you how to do this. I looked here for the solution, ...

...eject a cd from my Dell studio laptop? Hi, There should be a button on the DVD/CD drive itself, just push that small button and the tray should eject. If you can't fine the button double click on ...

...cd i, how do i eject it manually? In the front of the CD Drive, there is small pin hole, it is usually located near the Eject button. To manually eject it, use a pin about 1 to 2 inches long, push it ...