Dell Dimension 3000 PC Desktop "hard drive pin jumpers" Questions

...hard drive as master and install the new hard drive as slave. Here is the link to jumper settings from Westrn Digital; ...

Hard Drive or CD Rom Upon Power on, the Dell 8100 Dimension will not detect either the Hard Drive or the CD Roms. I tried a known good drive. If the drives share the same IDE cable, try to replace the

hard drive. It will be labeled IDE1 probably if you have it. Old motherboards used to have 2 IDE headers, modern ones have one or none. The ribbon will have three plugs--one for the mobo, and then two

...hard drive. After putting in a new hard drive, i get a message when i try to install my restore windows disk. the message is as follows: INF file TXTsetup.sif is corrupt or missing. Setup cannot ...

...drive or hard drive for selecting master or slave. If you find it, unplug the power cable, remove the jumper. Wait 10 - 15 seconds, then put it back. Plug the power cable and try power up your ...

...hard drive & put onto a disc. My motherboard went on my Dell computer. Not interested in putting new one in. What I do want to do is pull all the info off my hard drive & put onto a disc. My ...

...hard drive, but the system isn't recognizing it...i checked device manager and it isn't there... is it something i need to do in the bios? if so, what do i do? thanks alot m If the drives are ...

...hard drive(3) IDE hard drive(4) usb CD-ROM drive cant reboot.Bought new hard drive from Dell/same results.There tech hinted @ motherboard? You should be able to get a start up software that is a ...

Hard drive not installed I have a D-2400 that boots to the BIOS and when looking in the BIOS it says there is no hard drive installed and yet it is in the comp and spinning, I know this HD works so I ...

...hard drive to my computer which is a dell dimension 8200 it has a maxtor 40gb i want to add western digital 80gb.can you explain to me the proper procedure to do this and how to set jumpers (if both ...