Gateway GT5220 PC Desktop "mother 39 boot video" Questions

...39;t cost reduce your mother bd speaker off). The BIOS would give you a series of beeps like one long and 3 short meaning no video controller found or 3 quick meaning bad memory. They are all ...

...39;t boot and has no signal to the monitor. The computer does come on lights up cd rom lights up but has no video. yes the monitor is good. So what do you think PSU or mother board? I would like to ...

...mother board except the cpu and the heat sink fan. Turn the computer on and you should get a post error beep. If your computer stays running then you will want to attache everything one piece at a ...

mother board. Before replacing the video card boot the machine into safe mode by pressing the F8 key and selecting it from the options.Then remove and reinstall the video card in windows. Download the

...39;t even check bios no monitor Hi, Turn off the computer and open the side cover by removing two screws. If you have a video card remove it and clean the connectors with alcohol and also the memory ...

...39;t do that as the device drivers would be different.  Very unusual performance for hardware problem, I never had luck swapping mother boards,in my experience you are in dangerous territory ...

...Mother Board CR2032 +3V Battery fitted. Did the new RAM help?It does sound like the battery might be in backwards,-its what keeps your date and time...even when you have no RAM inserted the ...

...mother board and try booting with just the CPU, one stick of RAM and the power supply unplug (from the board) any thing else, I've seen in the past a random sticky (on) power button and did the ...

...mother board or video board. When I attempt to boot from the pc restore DVDs that I created, the CD light flickers for some 30 seconds or so and then stops with no visible output. Are there any ...

...mother board step by step. please tell me Insert the Windows installation disk into your CD drive. Shut down your PC. Then, boot from CD. This part is important: do NOT run the Windows installation ...