Question about Lexmark Z Office Equipment & Supplies
It wont'n print because the carriage that the inkjets are on will not move past half way ok if the carriage is not moving half past way :just go ahead and take out the inkjets :nw take out the power ...
...roller at back of machine and main rollers do not have any obstruction. I found that the printer carriage was sticking (may be wear or congealed ink) . I removed a small plastic component from ...
Question about Lexmark Z Office Equipment & Supplies
...see that it is clear w/ fine lines printed on it. My infant son removed this part and now our carriage zips back and forth "snapping" as it hits the ends. My guess is that this strip acts as a ...
...remove the tape or plastic protector from the bottom of the new cartridge and put it into the ink carriage. If this does not work for your printer it may have a button or menu option to move the ...
carriage slams into left side Mine is a Z615, quite old. The printing will start, but after about 5 lines, the carriage slams into the left-facing inside with a terrible bang. Then won't print
The ink cartridge is jammed Unplug from mains. You should now be able to move the carriage and get easier access to cartridge. Gently remove
Question about Lexmark Z Office Equipment & Supplies
...tell me it is printing. I can hear it printing.Paper always comes out blank What you hear is the carriage going back and forth as well as the paper being transported through the path. The actual ...
Question about Lexmark Z Office Equipment & Supplies
...installed - still no black printer unplugged - five minutes - replugged - still no black printer carriage contacts cleaned - still no black connector ribbon from main board to printhead board ...
unable to change cartridges no instructions with printer Open the front cover.The carriage will come out.Open the covers and pull out the old cartridges.Then remove the tapes from new and pull ...
Question about Lexmark Z Office Equipment & Supplies
...Checked small at rear and main rollers to see if there was any obstruction. I checked print carriage and discovered this was sticking and did not move smoothly. There is a plastic component
256 questions posted
Usually answered in minutes!
280 Questions
151 Questions
114 Questions
115 Questions
111 Questions