AT&T LUCENT / AVAYA CALLMASTER IV PHONE TELEPHONE BLACK COMCODE 847933850 "telephone feature button" Questions

...telephone. ... Lift handset, press Voice Call key or press the Feature button, then press 66 2. .... At the LOG: prompt, enter your mailbox#(extension #. and your password all ... [PDF]N QRTEL ...

...telephone, must first have the feature CFV (Call Forward Variable) on in the line. This feature can be provided by the telephone service provider. A typical feature code for this is *72 to activate ...

Telephone For external numbers press FEATURE *1, then press the button you want to store the number on, then enter the phone number using the dialpad. For internal numbers press FEATURE *2, then press

...is the 'feature button' on the Avaya Euro 18D phone? Which button is the 'feature' button on the Avaya Euro 18D phone? It's the gray button labeled FEATURE just to the left of the #1 on the

...telephone? Programming memory buttons External autodial 1. If you are on a call or an open line with dial tone, press Hold or Rls 2. Press Feature * 1 3. Press a memory button. 4. Dial the external ...

...telephone. Feature 981. Then enter password, default is 0000. To program a button to do this, 1. Press Feature * 3 2. Push the button you want to program 3. Press the Feature button then enter the ...

...if it has something assigned to it press the mic button and press the button again to assign the code. Or just remember the code and use it. The feature button is just that when you use up

FEATURE 0 Dial an external telephone number using a two- or three-digit code. There are two types of speed dial codes: system (01-70 or 001 to 255) and personal (71 to 94). System speed dial codes can

...telephone number Press Set/Store Enter the memory number (M1, M2, M3 or 1-9) Press Speakerphone button to hang up. To use the memory feature, For M1, M2 or M3, just pick up the phone and hit that ...

telephone number, then press the OK softkeyFor Internal Numbers (Extensions.: 1. Press the Feature button, then * 2 2. Push the button you want to program 3. Display will read "Intercom #:__" 4. Enter