Konica Minolta bizhub C450P Laser Printer "pm" Questions

Question on a Konica Bizhub 600. Works well after a PM is done, but is starving for toner after 15,000 copies. Is there a way to increase toner output? Make sure that during the PM the LD1 and LD2 ...

i want to set my pc to the printer nest u pm me if still problem

Transfer roller unit?. Cheers Hey, you have to go to the service menu andd under conter there is sa PM conter and life conter, and from there you have to reser transfer roller unit count

why should i change drum Usually because of some copy quality issue, the pm indicator will come on and stay on for quite some time, in fact I dont think I have ever seen one actually "shut down" ...

...hole use a clear brush mite as well remove them all do the same, should be done during 250,000 PM kit install. If not that switch drums, then switch sensor all the same, last control board

is turning. The sensor in the developer unit has failed. In some cases this code will occur after a PM where the developer was replaced and calibrated but the developer or drum counter was not cleared

(ATDC) Abnormally low toner detected TCR sensor. Problem with the developer, toner sensor, or if a PM was done and the counters were not cleared property. Open and close front door to reset. If error

...2422 for konica minolta c6500 Magenta drive motor, has the magenta developer been replaced? has a PM been done on the machine did the technician use a vacuum cleaner to remove the old developer

...corona unit? When is the last time the developer and drum where replaced? When the last time was a PM done? Very 250,000 copies a PM must be done? Which replaces the Corona Wires, Developer, Drum, ...