Thermador SC302T Electric Double Oven "panel locked thermadore" Questions

...panel lock , so the door is lock. How to unlock? Hello April, If any OVEN FUNTION is being used... The controls cannot be LOCKED off... So no... REQUIRES PUSHING 2 buttons & holding for four (4) ...

...a fault with the lock remains to be seen. Here is what I`d suggest you try... Locate the service panel for your oven ( should be an isolated 40amp breaker ) and turn it off for a few moments and ...

...locked, and don't have a troubleshooting manual. The only way to stop the clicking noise is to shut the oven off at the circuit breaker. Any advice will be appreciated. iodine, open the upper oven, ...

locked cant open. please help the oven lock is controlled by a microswitch. it is not working so you have to go in and manually unlockl it. take top front panel off and look for 2 wires that are going

...locked, the cooling fans have stopped. Any suggestions would be helpful. Thanks PS We also have the dim LCD issue and your solutions were very helpful:-) replace the latch assby OK...you need to ...

...clicks, lock flashes every so often, but doesn't heat up and fan does not come ob. Replaced control panel 6 months ago. Just tried to use self clean and the bake element heats up. ...

...below upper door) next to the lock latch assembly. **Turn off the 40amp breaker at your service panel or sub-panel in the home before attempting any service...safety first** With the power off, ...

...bake, broil and roast do not. I can hear the beep but nothing on the display. The light, panel lock and timers all work fine. I find it interesting that half of the functions work and all ...

...above the lower door next to the lock latch assembly. **Turn off the 40amp breaker at your service panel or sub-panel in the home before attempting any service...safety first** With the power off, ...

...locked? If the Panel lock button is lit, it means the controls are locked. Hold the Panel lock button until it is no longer lit. Other than that all I can suggest is to contact Thermador. They may be ...