Thermador SEC302 Electric Double Oven "range require 2" Questions

...range I took the door off of. I'm trying to take the door apart but there are 2 screws behind the logo plate that need to come out. The problem I'm having is getting the logo plate off without ...

...the oven lightbulb? Most require 2 screws to be removed to lift the glass cover from over the bulb. Then simply unscrew the bulb and insert new bulb. A 1/4" nut driver is the best tool for the

range. there is a broiler button on the front panel. i push that button but nothing happens. is there something else that needs to be done+ Usually you need to turn the temperature to broiling (high),

...range. Will I need to get a separate electrical outlet or can I join the oven and the cooktop electrical into the one existing outlet? Providing the existing switch outlet iscontrolled by a 30amp ...

...Range" or "Stove" but is typically a double pole 50 Amp Breaker (It takes up 2 spaces). If you look at the handles of the breakers, you should be able to see the numbers "50" on the handle. Once you ...

...2 cup) of water into the bottom of the oven cavity, close the oven door and push the SteamClean button. At the end of the cycle, consumers wipe out the bottom of the oven, easily removing oven soils. ...

require is the ability to pull the range out to remove the rear panel and gain access to the sensor connector. If you do not feel comfortable doing what is suggested, you may want to call in a pro. It

range to change the terminal block. Solid elements and smooth top elements require raising or removing the main top to gain access. You will need to remove power from the range before lifting the main

range has been disconnected, so please double check before continuing. 2. Gain access inside the control panel. 3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.

...Range has to cool down before the door can be opened due to the safety interlock thermostats. If you just ran the self-clean cycle unplug it (or turn off the Circuit breaker) and let it sit for 2 ...