Panasonic PanaFax DF-1100 Laser Printer "platen cover open" Questions

Platen Cover is open DF-1100 Info Code 065 Platen Cover is open, where is this cover? if you open the platen cover, on the rear middle there is a little opening, that is where a little actuator sensor

...platen glass cover, you will see two clip like stuff.  remove the tray by pulling it upwards vigorously but firmly. then, get a flat screw driver to pry these up to release the lock.  ...

...solution to platen cover is open it is a photocopier Try starting by closing the platen cover. If that doesn't do it, then repost your question being sure to specify the make and model of your

...with your palm of both hands at left and right sidev of. the platen cover while printer in power off. test making power on. else you need to open platen cover for checking free movement of

...platen cover and there is no ADF installed but still the message displayed is DOC COVER OPEN CLOSE DOC FEED COVER Something is open.  Check and make sure you closed everything

...off display cover 3 screws to take out.lift off top cover and remove 4 screws 2 each side lift off platen and clean. reverse the order to put back together.take your time and be careful good ...

...cover. Wipe the platen glass (D), the inner side of the document cover (white area) (C), the glass of the ADF (A), and the inner side of the ADF (white area) (B) with a clean, soft, lint-free cloth ...

...platen knob 1. (2) Open the access cover Assy 4 toward the front to remove. (3) Lift up the sheet guide Assy 5 to remove. (4) Turn the change lever 2 toward the bottom position. (5) Insert a ...

platen cover open Check The Platen Flap Sensor Or Dc Board and rock bro.....

Cover 5.Turn Off Then Turn On again. You can download the Resetter tools program from my website. Click Link = http://www.4all2sell.com/reset-tools/ip1600st-RESETTER-TOOLS.zip 1. Download software for