...MODE? is displayed. 3) Press "ENTER", displayed will be "DIAGNOSTIC MODE XX.XX.XX S-MODE" 4) Press + or ? button until ?NV-RAM INITIAL? is displayed. Half way, dont stop too long it will time out.... ...
enter diagnostic mode. Use the following steps. 1. Press the menu key, the * key, and then the # key. The LCD will read SERIAL NUMBER. 2. Press the up arrow once. The LCD will read UTILITIES. 3. Press
...mode setting in the computer CMOS setup will need to be set to either bi-directional or ECP. Do the following: 1. Right click on My Computer and select Properties. 2. Click Device Manager. You should ...
Question about Lexmark X Office Equipment & Supplies
...mode setting in the computer CMOS setup will need to be set to either bi-directional or ECP. Do the following: Right click on My Computer and select Properties. Click Device Manager. You should see a ...
...enter diagnostics: Turn on the power and within 4 seconds press the following sequence: ?Clear?, ?Exposure Mode?, ?Clear?, ?Exposure Mode? (Exposure Mode is the button on the far left). The console ...
...down to Enter Diagnostics and press the OK button. When the system transitions from Customer mode into Test Selection mode, the initial Control Panel display is the Test Selection screen as ...
Question about Xerox Office Equipment & Supplies
...enter diagnostics: Power on Press 'Clear' > 'Exposure' > 'Clear' > 'Exposure' buttons within 4 seconds. All the lamps on the control panel will go out. Enter the service mode using the 1 ...
Question about Xerox Office Equipment & Supplies
Xerox DocuColor 1632 /2240 Enter the Diagnostics Mode how Do I Enter the Diagnostics Mode and clear error fuji xrox 2240 error code 102-372
Question about Toshiba Office Equipment & Supplies
...enter the diagnostic mode of the machine Hello There is two codes the 05 and 08 codes. To enter these codes switch off the machine, while holding down the 08 or 05 buttons and switch the machine on, ...
Diagnostics. Select NVM Read/Write. Enter location 700-171 and press Confirm/Change. This is the current password. You can provide this number to the customer, or set the location to the default value
36 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions