...Scanner Failure...? If then try these steps mentioned bellow: Remove all the ink cartridges from the All-In-One. Unplug the power cord from the All-In-One as well as the power outlet. Now move the ...
...carriage stalls in the center then it is a scanner failure issue. Removed all the ink cartrigdes and move the carriage too and fro a couple of times and then reinsert the cartridges. You can try a ...
Question about HP Office Equipment & Supplies
...carriage or the scanner. Solution Follow the steps below in the order presented to determine the source and resolution for the noise. Step one: Checking the scanner This step applies only to products ...
scanner lite carriage won't move at first it seemed like it was stuck to right and made clicking noise,lifted cover noticed that noise was carriage trying to move.removed glass and blew out and ...
Question about HP PhotoSmart Office Equipment & Supplies
...carriage error & scanner failure The printer carriage makes a terrible grinding noise and won't move when the lid is opened this means that no function (even including faxing) can be done. Any ideas. ...
...scanner unit and check that the carriage lid is fully closed, check along the carriage path for any loose objects. Turn the printer on with the scanner part open and see if it moves across at all or ...
3 scans) the recommended scanner driver from Epson. I had been using ArcSoft scanner driver but it stopped working. Ahem, the 'carriage' lock was halfway between locked and unlocked. It works fine now
...scanner failure after warnning up Remove both the ink cartridges from the All-In-One. Unplug the power cord from the All-In-One as well as the power outlet. Now move the carriage (carriage is the one ...
...Scanner arm locked up far right with clicking sound. Is there a way to reset the whole thing? HELP!!! Remove both the ink cartridges from the All-In-One. Unplug the power cord from the All-In-One as ...
carriage or the scanner. Try this: Follow the steps below in the order presented to determine the source and resolution for the noise 1. Check the scanner (if it has a flatbed) Open the scanner cover.
292 questions posted
Usually answered in minutes!
1,869 Questions
1,438 Questions
900 Questions
484 Questions
508 Questions