Question about Canon PIXMA Office Equipment & Supplies
...holds the ink tanks in place. Lift the overflow tray toward the top of the printer and slowly pull it out of the printer. Take care to avoid spilling any ink that has collected in the tray. Good
...lift the rear of the tray as it fed in, as it appeared to hit something on way in when fed by itself I finally got the printer to work by manually pushing the disk into the printer just before the ...
...Lift the Scanning Unit (Printer Cover) until it locks into place. When the printer is powered on and the Scanning Unit is lifted, the Paper Output Tray will open automatically. If the Paper Output ...
Question about Canon PIXMA Office Equipment & Supplies
...in the head tray they are probably blocked with dry ink. You can remove the print head and tray by lifting the lever and gently lifting it out..... go here http://www.inkjethelper.com/ to see how to ...
tray where the paper comes out, you should be able to lift up under the word canon. It should lift like a car hood. If the printer is on then they will come to the center of the machine and stop. Lift
...tray. 4. Remove orange tab from the cartridge, do not touch printhead or circuitry on the cartridge. 5. Insert cartridge to aprioprite slot under slight angle and lift it till click in the place, ...
...error when I try to print, not all the time but occasionaly. The tray is open, and not blocked or lifted up or anything "Document printing cannot be executed because the paper output tray is
...tray. Pull the gray leverl that is now revealed out and up to lift the whole scanning unit. Open the first inner panel. This reveals the second inner panel, open that. The unit holding the cartridges ...
...lift the hood ..as the tray slides to the left ... pull the power cord out so the printer shuts off. 2. once the ink tray is on the left. follow the ink tray rails to the far right. 3. below you ...
...change it to print from the other tray. It sounds like one of the two springs are damaged underneath the machine causing it not to lift. i would look underneath and inspect the springs hope this ...
199 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions