Kodak EASYSHARE 5500 All-In-One InkJet Printer "saying print head" Questions

...print head nozzles. If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive. It may be more cost effective to buy a later ...

...print head. Many people would say it was the sponge that is doing that but let me tell you if it was a full sponge you would not even see that color tint. Its the print head that is not mixing ...

...Head Cleaning > test print > repeat nozzle check, head cleaning & test printing until problem is gone. If this does not fix the problem, replace the black cartridge > head cleaning > ...

...print head is loose or missing, but I have checked and it is not. Hi, First thing to do is get the top off which can be easier said than done. The printer has four screws holding the top. After that ...

...saying "Colour ink cartridge needs replacing. Replace colour ink cartridge". Have took the cartridge out and replaced it but unsure of the problem. This is very fustrating as i do a lot of printing ...

...saying replace black ink cartridge and i have Black printer ink in kodak Printer may fail to be recognized by the printer. Most times an error message will be sent indicating that something is wrong ...

won't print, copy, or scan won't calibrate or clean heads started out with printheads rolling and rolling with no printing results says tray not engaged says check paper paper jams continuously when ...

...saying that the print head is not in properly, how do I remove and replace the print head please? Information you need http://www.retrevo.com/r/2610ag615/110/Printhead#q=Kodak+EasyShare+5300 ok go to ...

...print head and when I reinstalled it it keeps saying not installed properly etc, but it is installed correctly. Also it won't let me try the head from another printer. Go to the Kodak printer ...

...print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing. That is where you'll find the print head assembly parked on top ...