Sony PlayStation® 3 (60 GB) Console "tv wont change channels" Questions

...wont work in my sanyo tv when i plugged my ps2 on the tv, the picture keeps on moving. do i need to change on the confuragation system of the tv or the ps2?i need help man. Are you hooked up to be on ...

...tv the screen wont come up You have to reset the console by holding down the power button on the console itself until the light changes from red to green and back to red again, after that make sure ...

wont transmit a picture to my television Make sure everything is connected correctly. Then, turn on the PS3 from putting your finger on the "power button" but HOLD IT DOWN. After a few seconds it will

...wont be connected via Bluetooth. There's a button (pressure sensitive not a push switch) on the front of the console by the BR disk slot. Its also possible it is switching on, does the green light ...

tv. they worked fine until i started using the hdmi cable and when i went back to the other cables it doesnt work Ok, you need to reset the PS3 back to standard video settings by doing the following :

...wont work but, if you have a camera (camera phones can work to) watch the top of the remote through the camera, press the power button and the bulb at the top of the remote should flash (you can only ...

wont read any discs, games, etc. I put in the disc but it doesnt show. Please help. firstly determine that the disc is not dirty or corrupt. simply by trying another disc. Turn off from power and turn

...tv first, make sure your input setting is set for the ps3 (you may have to quickly switch after turning on the ps3 at front) 4. turn on ps3 at back, then turn ps3 on at front, wait about 2 seconds, ...

wont connect up to my tv i have a 13 inch tv and my wii physically connects to it but the wii screen doesn't come up check all cords then check the chanles on your tv have you tried changing the video

...TV except the one I actually want to use it on, the screen jumps up and down and wont stop, I have tried adjusting everything, different channels and I also tried hooking it up pretty much every way ...