Thermador REF30 Electric Kitchen Range "replacing baking element oven" Questions

...baking results. If the bake element is burned out, replacing it should solve the problem. Otherwise, you need to further troubleshoot the oven's electrical system to locate the defective wire or ...

Oven heats slowly, bake element has been replaced Model GLP85800 The oven stopped heating and we replaced the bake element (which was very obviously blown). Now the oven will heat to 350, but takes a ...

...baking results. If the bake element is burned out, replacing it should solve the problem. Otherwise, you need to further troubleshoot the oven's electrical system to locate the defective wire or ...

baking element isn't working. The baking element got really bright in one spot while the oven was on 350F and then it no longer worked. It looks like the coating or whatever on the oven baking element

...replacing the bottom (baking) element I replace the bottom (baking) element, but it doesn't work. I check it twice to see if a wire was disconnect but it wasn't. The element blew out 2 months ago and ...

...oven heats, the element glows red. This element has an expected life-span of several years. It may last for only one; it may last for many more. When the element burns out, you need to replace it. if ...

...baking results. If the bake element is burned out, replacing it should solve the problem. Otherwise, you need to further troubleshoot the oven's electrical system to locate the defective wire or ...

...baking stone resting on the element? It sounds like the element has shorted out and it should have tripped the circuit breaker and/or blown a fuse in the unit. Replacing an element is not difficult ...

...the oven heats, the element glows red. This element has an expected life-span of several years. It may last for only one; it may last for many more. When the element burns out, you need to replace

...element or an oven control problem. If you have a volt meter, remove the back of the oven and test the voltage across the bake element terminals while it is on. You should have 240 volts. If it is ...