Question about MSI Computers & Internet
display h55mp31 motherboard Hello Heidi, you may have two VGA port. my guess is that your monitor is on the main board VGA, remove the VGA connector and locate the other VGA port. usually the graphics
....!! If its signal not connected or no display,you better change video card,but it does,i think the problem would be the the vga port of your motherboard,so you need to replace motherboard on it..ok ...
...port is sending out signal than you'll need to trick the bios. Suggest you remove the Gforce4 Ti AGP card from the MB so you can regain video display and change the settings within the bios. Once you ...
...port on the motherboard, can't get any display whatsoever, monitor claims to receive no signal. Have tried to put in other cards for monitor in slots but still no success, any help would be greatly ...
...port on the motherboard, neither of which display an image. i've tried the RAM and that never helped i've also tried the hard-drive just out of curiosity and to no effect. Try to remove the graphics ...
display options . I say this because it is important that you are able to reroute your video signal to your SVGA Out from the laptop (for sure) and it is in fact in that video output mode. Once you're
Question about Biostar Computers & Internet
...signal"). On the motherboard, BIOS post code displays "d4" and I don't know what that means since I can not find it in the manual book. Please reply soon. Thanks. your VGA port is not working ..tight ...
port. This could interrupt communication between the computer and Switch that might cause erratic mouse movement, or result in errant display of characters when using the keyboard. To disable AutoScan
display comes on for awhile then goes off and says no signal. i have tried vga and dvi ports, same problem Do you hear the Windows startup sound after a while? If you log into safemode and removed the
Question about AMD Computers & Internet
...a local repair shop When the HDMI port has a graphics signal and the laptop screen does not, this can also be in Windows. Check to see if Windows is selecting only the HDMI port as the active
815 questions posted
Usually answered in minutes!
1,358 Questions
590 Questions
517 Questions
494 Questions
420 Questions