Actually it's really recommended that you use the type of
memory modules meaning if your ram is a single-sided you need to get a single-sided ram so everything will be working properly.
more...
CMOS, by pressing f2 or delete button, but be careful, just have a look if your board is reading the hard disk and
memory. try to go exit and press the load set up defaults, your system might not be read at all , a loosen cable or
more...
If your motherboard does not turning on try to check your
memory module sockets cleaned and the video card and test your
memory module if its okay to other motherboard. If not there is a problem
more...
NO beep code means motherboard has died , no matter if the fan spins for CPU . If
memory was bad or even dead the motherboard would beep rapidly . http://www.fixya.com/support/t893012-motherboard_message_led_message
more...
Tony, check and see if any of the capacitors are bulging or seeping brown stuff. Especially near hot places like the heatsink, or the
memory. This is a pretty common failure, and the only fix is to solder in new capacitors. Check here for more information.
more...
starts up with beep codes as follows,,, 3beeps followed by 3 beeps followed by 3 beeps no video any idea that might be a
memory problem make sure u are using the correct
memory modules and not less than 128 sticks than reboot and see what happnes if it
more...
vga My pc is working good but i decided to add some
memory on it. The problem is i accidentaly placed a wrong
memory card on my pc's
memory slot with another
memory card in it. when
more...
Sponsored Links