ASUS K8V-MX Motherboard "seagate hard drive jumper settings" Questions

hard disk ST 3160021A SEAGATE 160GB IDE SLAVE. BUT on the BIOS the 2nd appear on 1st MASTER. Please can you help me. sorry for mi inglish. Check your jumper settings... Following link is for your hard

...Hard disk. http://www.seagate.com/www/en-us/support/installation_assistance/jumper_setting_illustrations/ ...

Seagate ATA hard disks supporting the Cable Select jumper option be configured as Cable Select. If your computer system was built prior to October 1998 and does not support UDMA 66 or greater you will

...seagate hard drive. for some reason the motherboard can't or wont detect the hard drive please healp if you can! The reason could be that both the drives are Master. You can have only one Master and ...

...Hard disk, by setting to 1.5gbps speed ? The designers of SATA aimed for backward and forward compatibility with future revisions of the SATA standard.[citation needed] To prevent interoperability ...

...hard drive manufacturer, Seagate/Maxtor, has added a user-accessible jumper-switch known as the Force 150, to switch between 150 MB/s and 300 MB/s operation.[9] Users with a SATA 1.5 Gbit/s ...

...Seagate 7200.10, still available in the market. I suppose, this drive supports the revised 300mbps spec which is not supported by VT8237. However, most controllers allow forward compatibility ...

...hard drive to see if it has a user-accessible jumper that will switch it to 1.5Gb mode. I know that Seagate/Maxtor drives have a jumper they refer to as Force 150 and Western Digital calls their ...

...Seagate Ultra ATA hard drive show up in the BIOS but NOT in My Computer (Using Windows XP Prof.. The Quantum hard drive showed up in the hardware stack in windows. The Seagate I could not get Windows ...

...Seagate Hard Drive. (Old one was beginning to make noise. I went through the Install procedure and all seemed to go OK untill I tried to clone the old drive to the new one. Evidently the machine did ...