Question about Intel Computers & Internet
Problem with installing win2003 on motherboard DG31pr. I just purchased Intel DG31pr m/b, 2GB ram and 500GB HDD. I am trying to install windows 2003, but it is stopping while installing devices phase ...
...systerm sound software foxconn pc45cmx mother board, first i install Realtek sound software but displayed error code 10, i dont know,what i do. if u r having isues with the sound system of ur PC ...
...motherboard to install the appropriate drives. If they are enabled in the CMOS/BIOS but yet are not displayed in the Device Manager, you may have either an IRQ conflict or a hardware fault. Hope this ...
...IRQ's when installing the new cards? if so I would disable the on board in the bios. also what kind of card is it.. PCI, PCI express, AGP... You may want to lokk in the bios to make sure that port is ...
...display anything on ur monitor screen as well as ur system keep restart at POST (Power On Self Test) Operation (When VRAM driver is not loaded. and the last reason is: 3. Your system is not able to ...
...display will not auto disable the internal graphic although i have set to PCI-E / Int Did you install the drivers ->First from the CD, then install the graphics card? No? Start over. Once you ...
display. Also while in the bios allow, Page 2-27 in manual, Allocate IRQ to PCI set to [Yes]. Page 2-24, Internal Graphics Mode Select, [Disable] Luck! Mike U WIL HAVE TO CHANGE THE JUMPER SETTINGS ON
...display & not VGA. Pg. 32. While in the bios disable the audio. (for now). Set Plug & play Aware O/S, to No. (This allows the bios to set IRQ's rather than windows). Save & re-start the PC. Did you ...
Question about ASUS Computers & Internet
...IRQ to PCI VGA is set to Yes Pallette Snooping is set to Enable BOOT Boot settings configuration AddOn ROM Display mode is set to Keep Current BIOS is American Megatrends V02.58 OS is Vista Ultimate ...
...IRQ and how close it is situated to the cpu... Monitors are also prone to this problem have you tried the system on another monitor.. Have you been into the bios and changed the settings for the ...
10 questions posted
Usually answered in minutes!
1,358 Questions
703 Questions
590 Questions
517 Questions
494 Questions