Samsung LE40R74BDX 40 in. LCD Television "tv unscrewing stand" Questions

...TV stand are quite small and deep inside the holes. You can not take the stand off without take them out completly. I tried to remove them with magnetic screwdriver, tweezers but didn't help. So, by ...

...stand from the tv? unfortunately you do not include the brand and model of the tv. Anyway, lcd tv usually has 2 screws on its stand. Unscrew them all the way. Hold yuor stand and slide your tv up or ...

the bottom stand, so I can attach the TV to my wall? Thank you. There are 4 shiny screws at the back of TV just above the stand neck. Unscrew those 4 scrws and then lift the TV up, stand will come out

...tv off the stand. The manual doesn't address this anywhere. Any ideas? There are four screws in the back of the TV above where the stand is. Inbetween the screws is a metal handle that pulls out. ...

stand from my tv 1. Verify that there are 4 screws fastened (2 screws on each side which can be unscrewed using a hexkey) 2. place the TV on a flat surface with the screen facing down... unscrew the 4

...off a lg 42lh30? There are 4 screws to take the stand off your tv set the screws are near the stand to the back of the tv . when you unscrew them you should try taking the tv off by pushing it up

...stand from a flat panel TV I have an Insignia 42" flat panel plasma TV ( NS-PDP42 ) that I want to wall mount. How do I remove the base, which folds into 2 pieces, but does not seem to want to let go ...

...the flatscreen tv from its orginal stand I don't know how to remove the flatscreen tv from its orginal stand You need to unscrew the back of the stand it should have 2 screws in 2 small ...

...replace with the same fuse from a nintendo ds they are the same blow rate. before turning on the tv when you put everything back check the capacitors on power board the 16 volt 1000uf check these ...

...tv stand part because i want to mount it? After disconnect power/antenna/any AV wires, turn your TV. Look at back side of your TV (on TOP of Stand part). You should see some screws there. To remove ...