Samsung LE40R74BDX 40 in. LCD Television "auto adjustment available" Questions

...2 seconds, sometimes nothing, Then a message come up "weak or no signal". We have all tried to auto tune these in but to no avail...can anyone give advice? Sharon Try manual tuning on that ...

...auto scan achievable with the remote control device with adjustment to settings on the channel buttons would produce a signal only with available transmitter stations. Performing a channel auto scan ...

...available. ? [Auto Picture]: Sets all picture settings to the factory default. ? [Brightness]: Adjusts the intensity and details of dark areas. ? [Contrast]: Adjusts the intensity of bright areas, ...

...refresh rate in the Picture Menu 60HZ is normally the standard but try others. Or if you're TV has Auto Motion Plus options you try turn it on it can be found in your television's menu under Picture ...

...auto program will adjust everything including all channels that are available in your area, excluding if your using a cable box, direct tv, or satellite receiver. Hope this helps, tv's have been made ...

...Auto Protection Time, the option is grayed out, and when I try to click on it to adjust it, it says "this function isn't available." Try switching the "Source" to TV (click on "Source" button on the ...

...available settings you can adjust: Off and On.Balance Press the right or left arrow buttons to adjust how much audio is sent to the left and right speakers.Auto Volume Level Reduces the annoying ...

what do auto fill and auto zoom do on the picture format settings? You have to enter its service mode options, and make necessary data adjustments there.  Just remember, this is a very skilled ...

...auto-adjust their resolution (within their specifications) to the signal being received. So, if you are receiving an over the air/cable television signal (most are 720p), you cannot force it to go to ...

...available. any ideas Main system control memory IC fault. Check and replace it. Before replacing this IC, try a hard reset to this set, and check once more by make an auto-tune to it. There are two ...