Toshiba REGZA 42WLG66 42 in. HD-Ready LCD Television "tv sap settings" Questions

...SAP And once I tried that trick, and it was in actual Spanish. this is only on the primary stations. If I tune to .2 or .3 the audio is in english. This is on several stations in my viewing area. the ...

TV has exhibited absolutely no problems previously, all audio and video has worked like new. Satellite channels (DirecTV) all work fine, local channels are received on an antenna. A couple of days ago

...SAP light on the TV or VCR is on. If the light is not on, try the following: Push the MTS, STEREO, or SAP button on the TV or VCR. Adjust the fine tuning on the TV set to restore the stereo or SAP. ...

...tv Locate the SAP or MTS feature by TV remote button or TV Audio Menu. It needs set to STEREO. SAP or Second Audio Production is not used by every broadcaster. In those cases, you will have no SAP ...

...10 San Diego, CA Mintek TV model where do we find SAP on the remote control or TV settings? A lot of times the remote will have it marked as MTS, this will enable or disable Mono, Stereo, and

...on the tv and navigate to the AUDIO OPTIONS. Then change the AUDIO MODE from SAP to STEREO and you should get your sound back. Good luck, and post back if this helps or with how you are making

is pressed. On the upper right corner of the remote there is a SAP button. Once you press it , it will appear on the tv as stereo, mono keep pressing the SAP button until you here sound on the channel

Tv is olivia flat screen model 227-s11 Your SAP/MTS function is most likely turned on. This feature has 3 modes: Stereo, Mono and SAP. Stereo and Mono are easy to understand, it's the SAP that can get

...I think it's either a 48 or 52" Flat Screen. Check to make sure the TV is not set for SAP mode in the audio settings. If the brodcaster is sending a SAP carrier with no audio you will get no

...tv is working fine except for one channel nbc or channel 4,there is no sound every channel has sound,except channel 4,what to do? Might be as simple as you have the SAP or second audio progam turned ...